Main Features of TiaraCAD

Build Designs with Speed

Eternity Band in TiaraCAD

Eternity Band

Enter the Ring size and Gem size only. Choose your setting style and the design is ready with total Carat Weight and Metal Volume. In just one tool, you can use channel, plate-prong, collate-prong, nick, pave, bezel and even trellis setting without compromising on the manufacturing details.

Studded Bangles

Just like Eternity band, choose your Gem size, Bangle size and setting only and identify the total carat weight and metal volume.

Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.

Design Bangles

Choose the design for repetition, identify the overlap area and choose the bangle size. Design will be placed over the bangle with additional height modifications as per your requirement.

Heart Pendant

Choose gem size, overall heart size and setting for the gem. Optionally, add a gallery. Add a jumpring and loop from linkages to complete your design.

Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.

Metal Band

Simply add the desired ring size and the profile curve. Choose scooping if required. Design ready with metal volume for your perusal.

Solitaire Ring

Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.

Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.

3 Stone Ring

Select Center stone size, Side stone Size and Ring size along with setting to complete your 3-Stone ring in no time.

Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.

Build with just 1 curve

Channel Setting

Select a curve, shape and size of gem and get a channel setting created ready as per your company standards. Modify the ends, number of gem and number of supports as required.

Plate Prong Setting

Create completed Plate prong setting just on selection of a curve as per your company standards. This includes the gems set, prongs with correct overlap and cutters all aligned as per the curve. Just choose your desired gem size and count. Plus additional modification on it also available.

Micro Prong Setting

Create Micro Prong setting just on selection of a curve. Based on horizontal cutter, cutter along the length of the curve and the cutter to split the metal, the final metal is generated with split prongs at a go. Just choose your desired gem size and count.

Pavé Setting

Just select 1 curve and find the entire pave set on the curve, complete with the desired wall thickness, depth of pavé and cutters in one go. Just modify your gem size and count as per your design and carat weight.

Collate Setting

Choose your curve and size of gem to complete the Collate setting

Twisted Metal

Metal with a Twist​

With only 2 parameters, play with the twist on a curve to achieve your desired result in no-time.​

Line with Thickness

Many of the designs need an elevation by raising certain elements. Using this feature, you only need to choose a curve to have a cross-section profile oriented normal to the surface below

Nick Setting

All you need to choose is the curve, gem size and number of gems to complete your nick setting along with desired profile.

Settings with in-built grains and cutters

Pressure Setting​

Choose the sizes of center stone and surrounding stones. Adjust the height of metal as required and the scooping will also be ready.​

7 Stone Setting

Choose the Center Gem shape, setting along with outer gem shape and desired setting. Make easy adjustments as per need and your halo setting is done.

Invisible Setting - Open or Closed​

Only choose the diamond size and the desired rows and columns. Open or Closed Invisible flat setting along with setting walls and support walls will be ready for your perusal.

Automatic Pavé

Choose your surface and specify the optimum gem size to place the diamonds as accurately as possible in minimum time.

Halo Setting​

Choose center Stone shape and size and corresponding gems to have Halo setting readily designed for you.
Adjust the step heights or angles of gems to complete your design in a short time.

Multiple Cluster Setting​

Choose diamond size and number of tiers of setting to be created around the first 7 stones. Give angles per tier.​

Unit Collate

Choose a gem shape and a unit collate is generated

Prong Head

Adjust Gem Proportions, Prong, & Seat Settings to obtain your desired Prong Head.

Gem Between Two Curves

Choose the input curves, gem shape and setting type to populate the gems between two curves.

Bezel Setting

Add a Bezel Setting setting to the design with one click

Cabochon

Choose any gem shape and your setting type to get the desired cabochon cut.

Pearl Holder

Get a Pearl Holder in just one click. You can then change the diameter of pearl or dimensions of holder to your standards.

Gem Profile

Select the gem and you will get its profile curve created immediately

Gem Along Curve

Select the Curve and Gem Shape to set the gems along the curve with grain. You can also bake the output with cutters.

Gem View

Select the gems which you want to see in the front view.

Detailing - add the finer details on your creation in no time

Filigree

Based on the design curve and targeted surface, fill up the areas with filigree in a click. Scaling of design done automatically.

Milgrain

Just choose shape of the milgrain and the targeted surface

Supports

Wherever necessary, addsimple cylindrical or square supports perpendicularly oriented on the surface chosen

Rope

Choose the curve and have rope created based on the number of twists added

Loops & Bails

Select Shape of the loop / bail and the opening sizes for fast creation.

Male - Female

Create a male – female linkage by selecting the surface and the point on the surface

Combine Polysurface

Select a Polysurface and combine it to form a seamless surface for your perusal.

Gem Placer

Select surface and choose Gem shape and easily place gem where you desire. You can also adjust the size of the gem.

Surface Cutter

Choose any surface and your curve with which you want to cut the surface.

Backplate

Choose a design pattern and the targeted surface for the backplate. It will also give you the contact male / female connections.

Ring Resizer

Resize rings and retain Polysurface too. No distortion of prongs. No visible deviation between diamonds.

Chain Creation

Select the geometry of the chain  components with specified spacing and the necklace curve to create the chain.

SubD To Surface

Convert SubD to Surface by just selecting the SubD of your choice

Libraries - Data and Objects - Use as is, Modify or Add

Default Setting Parameters

Set up parameters as per your manufacturing to get the correct defaults every time you design​

Libraries

Choose from 500 + organic designs, Chains, Earring Posts, Beads and much more, which you can modify as per your requirements

Surface Profile Curves

Ready to use rails for creation of surfaces

Diamond Weight Charts

These help to calculate the total carat weight of the design.​

Metal Density Charts

Calculate the total metal weight of the design based on the metal chosen

TiaraCAD Rhino Jewelry plugin

Findings Studio

An exquisite list of Linkages, Clasps, Bails, Posts, Chains and Chain Tags to be used for design completion​

Ring Sizes

Ring size chart from different continents and the corresponding CAD requirement, all set in one file

Bangle Sizes

Convenient use of ready sizes while creating bangles

Broad Bracelet Sizes

Standard Elliptical sizes for convinient creation of Broad Bracelets

Loose Bracelet Sizes

Standard sizes that can be pulled up to a straight line for creation of parts and checking the total size

Reports - Generated for Designer, Merchandiser, Customer or export into your ERP

Designer Report

Essentially highlighting the total Stone Carat weight and the Total Metal weight

Total Metal Weight

Calculates the entire design’s metal weight based on your selection of metal. 

Gem Report

Get detailed Gem Map with drawing for the stone setter

Model Sheet Print

Ready to be printed Model Sheet, complete with your comany details, 4 views, metal weight, gem report, along with designer details

Export

All relevant information of the file, the design details ready to be exported in an XML format that can be further integrated with your ERP

Do you have a new feature in mind? We would love to hear from you. Please get in touch with us… 

1 Click Designs

  • Metal band
  • Eternity Band
  • Solitaire Ring
  • Half Eternity Band
  • 3 Stone Ring
  • Studded Bangles
  • Design Bangles
  • Heart Pendant
  • Halo Design
  • Cluster Design
  • Twisted Metal

Settings

  • Head
  • Bezel
  • Pressure Set
  • Invisible Setting
  • Flush Setting
  • Channel using 1 curve
  • Plate-Prong using 1 curve
  • Pavé using 1 curve
  • Nick Setting using 1 curve
  • Automatic Pavé on surface

Detailing

  • Filigree
  • Milgrain
  • Supports
  • Rope
  • Line with Thickness
  • Backplate
  • Male Female joints

Libraries

  • 500+ motifs
  • Curve profiles
  • Gem Studio includes Pearl & Cabochons
  • Findings
  • Beads

Customize

  • Predefined Setting parameters
  • Diamond weight charts
  • Metal Density Charts
  • Ring charts
  • Bangle Charts
  • Bracelet charts
  • Company details

Reports

  • Designer Report
  • Gem Report
  • Model Sheet Report
  • Export to XML file

Feature Request

DISCLAIMER : This is not a commitment of adding any features. All plans are tentative and subject to change without notice.