Eternity Band
Metal Band
Heart Pendant
Design Band
Halo Setting
7 Stone Setting
Nose Pin
Prong Head
Bezel
Unit Collate
Pressure
Invisible
Channel
Plate Prong
Micro Prong
Pave
Collate Prong
Variable Gems
Automatic Pave
Gem Placer
Prong Placer
Cutter Placer
Custom Gem Shape
Pearl Holder
Cabochon
Gem Profile
Gem Along Curve
Bezel Along Curve
Flush
Gem Map
Gem View
Rings
Necklaces
Bangles
Loose Bracelet
Broad Bracelet
Surface Cutter
Combine Polysurface
SubD to Surface
Ring Resizer
Array Objects
Filigree
Milgrain
Pattern Creation
Supports
Surface from Cross-Section
Twisted Metal
Ropes
Male - Female Connector
Linkages
Loops & Bails
Chain Creation
Curves
Earring Posts
Clasps
Jump Rings
Illusion Setting
Motifs
Chains
Chain Tags
Chain Caps
Money Clips
Beads
Design Stands
Surface Patterns
Cutters
Enter the Ring size and Gem size only. Choose your setting style and the design is ready with total Carat Weight and Metal Volume. In just one tool, you can use channel, plate-prong, collate-prong, nick, pave, bezel and even trellis setting without compromising on the manufacturing details.
Simply add the desired ring size and the profile curve. Choose scooping if required. Design ready with metal volume for your perusal.
Choose the design for repetition, identify the overlap area and choose the bangle size. Design will be placed over the bangle with additional height modifications as per your requirement.
Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.
Choose center Stone shape and size and corresponding gems to have Halo setting readily designed for you.
Adjust the step heights or angles of gems to complete your design in a short time.
Choose the Center Gem shape, setting along with outer gem shape and desired setting. Make easy adjustments as per need and your halo setting is done.
Create a Nose pin with standard prong setting parameters for a round diamond and metal with length, thickness and fillet parameters.
Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.
Choose the Gem stone size, it’s setting and the ring size with it’s profile to finish your Solitaire ring in a jiffy.
Adjust Gem Proportions, Prong, & Seat Settings to obtain your desired Prong Head.
Add a Bezel Setting setting to the design with one click
Choose a gem shape and size. As per the collate thickness and prong sizes,a unit collate is generated along with gallery if required.
Choose the sizes of center stone and surrounding stones. Adjust the height of metal as required and the scooping will also be ready.
Only choose the diamond size and the desired rows and columns. Open or Closed Invisible flat setting along with setting walls and support walls will be ready for your perusal.
Select a curve, shape and size of gem and get a channel setting created ready as per your company standards. Modify the ends, number of gem and number of supports as required.
Create completed Plate prong setting just on selection of a curve as per your company standards. This includes the gems set, prongs with correct overlap and cutters all aligned as per the curve. Just choose your desired gem size and count. Plus additional modification on it also available.
Create Micro Prong setting just on selection of a curve. Based on horizontal cutter, cutter along the length of the curve and the cutter to split the metal, the final metal is generated with split prongs at a go. Just choose your desired gem size and count.
Just select 1 curve and find the entire pave set on the curve, complete with the desired wall thickness, depth of pavé and cutters in one go. Just modify your gem size and count as per your design and carat weight.
Opt for variable gems either on 1 curve or between 2 curves.
Either case, choose the setting type. Specify the min and max diamond sizes desired. The gem sizes will be picked up only from the available gems in your charts.
Activate variable prongs as well is required.
Choose your surface and specify the optimum gem size to place the diamonds as accurately as possible in minimum time.
Choose diamond size and number of tiers of setting to be created around the first 7 stones. Give angles per tier.
Select the Curve and Gem Shape to set the gems along the curve with grain. You can also bake the output with cutters.
Choose a curve and size and shape of gems to get an array of bezels to complete the setting.
Adjust overlap as per design.
To place gems individually on a surface of a mesh, choose the prefered size of round gem and click on the surface / mesh. Each gem will come with a distancing offset for easy management. Use + / – to modify gem sizes as you go along. Only those sizes in the gem chart will be used.
Select surface or mesh as required. Specify the grain size. An offset indicating overlap is displayed for easy management with gems.
Cutter Placer allows you to select gems and create cutters for each.
It also allows you to place only cutter on surface if desired.
Get a Pearl Holder in just one click. You can then change the diameter of pearl or dimensions of holder to your standards.
Choose any gem shape and your setting type to get the desired cabochon cut.
Gem view allows you to choose a gem and it is placed in the center with the Construction Plane aligned to the gem.
Ring size chart from different continents and the corresponding CAD requirement, all set in one file
Standard sizes that can be pulled up to a straight line for creation of parts and checking the total size
Get a Pearl Holder in just one click. You can then change the diameter of pearl or dimensions of holder to your standards.
Choose any gem shape and your setting type to get the desired cabochon cut.
Choose any surface and your curve with which you want to cut the surface.
Select a Polysurface and combine it to form a seamless surface for your perusal.
Resize rings and retain Polysurface too. No distortion of prongs. No visible deviation between diamonds.
Based on the design curve and targeted surface, fill up the areas with filigree in a click. Scaling of design done automatically.
Just choose shape of the milgrain and the targeted surface
Various curves or patterns available to be used on a surface. Choose between circular or rectangular cross-section, it’s thickness to create patterns on surfaces.
Many of the designs need an elevation by raising certain elements. Using this feature, you only need to choose a curve to have a cross-section profile oriented normal to the surface below
Using a single curve, we can opt for the thickness and width of the metal, the parameters that determine the twist to get a twisted metal effect with flat back-side.
Using a single curve, opt for 1-Helix pipe, 2-Helix pipe or a combination of 3 pipes twisted together to create a rope-like effect.
Create a male – female linkage by selecting the surface and the point on the surface
An exquisite list of Linkages, Clasps, Bails, Posts, Chains and Chain Tags to be used for design completion
Select the geometry of the chain components with specified spacing and the necklace curve to create the chain.
Choose from 500 + organic designs, Chains, Earring Posts, Beads and much more, which you can modify as per your requirements
34+ chain components created for ready use in presentation along with the specification of spacing per component
A money clip is given. It can be modified as a polysurface to suit your size and thickness requirements.
Set up parameters as per your manufacturing to get the correct defaults every time you design.
Specify your company details as well to be printed in the standard reports.
You can import your company based gem chart per cut and carat. This ensures all gems created in the design follow only these sizes unless specified otherwise.
Also, in gem reports, carat weight calculation is 100% accurate.
Input the metal density charts as per the alloys used in the company. This allows for reliable weight calculation.
Volume calculation in TiaraCAD is based on the latest functionality. It allows for accurate volume detection. Based on the metal density chosen, weight of the chosen metal is calculated.
Also, based on the approx. metal loss percentage, one gets reliable final weight calculation after manufacturing and finishing.
Based on the design, all gems used will be seen with details of Cut, size in mm and Carat weight.
Ready to be printed Model Sheet, complete with your comany details, 4 views, metal weight, gem report, along with designer details
All relevant information of the file, the design details ready to be exported in a CSV or an XML format that can be further integrated with your ERP.
A Product of BlueStone Tech Labs Pvt Ltd
Made In India 🇮🇳
© 2024 All Rights Reserved by BlueStone Tech Labs Pvt Ltd